GitHub - Seeed-Studio/python-sscma: A Python library for interacting with microcontrollers using SSCMA-Micro, and for higher-level deep learning applications.

git clone https://github.com/Seeed-Studio/python-sscma
cd python-sscma
sudo pip install -U -e .

sudo pip install python-sscma

sscma.cli --help
Usage: sscma.cli [OPTIONS] COMMAND [ARGS]...

Options:
  --help  Show this message and exit.

Commands:
  client
  flasher
  server

sscma.cli client --help
Usage: sscma.cli client [OPTIONS]

Options:
  -B, --broker TEXT       Specify the MQTT broker address
  -U, --username TEXT     Specify the MQTT username
  -P, --password TEXT     Specify the MQTT password
  -D, --device TEXT       Specify the Device ID
  -p, --port TEXT         Specify the Port to connect to
  -b, --baudrate INTEGER  Specify the Baudrate for the serial connection
  --sample                Enable the Sample mode, default is Invoke mode
  -s, --save              Enable the save mode
  -o, --save_dir TEXT     Specify the Directory for saveing images
  -h, --headless          Run the program without displaying the images
  -v, --verbose           Show detailed information during processin
  --help                  Show this message and exit.

sscma.cli client --port /dev/ttyUSB0 

sscma.cli client --broker mqtt.broker.com --username username --password password --device device_id 

sscmai client --port /dev/ttyUSB0 --save 

sscma.cli flasher --help
Usage: sscma.cli flasher [OPTIONS]

Options:
  -p, --port TEXT         Port to connect to
  -f, --file TEXT         File to write to the device
  -b, --baudrate INTEGER  Baud rate for the serial connection
  -o, --offset TEXT       Offset to write the file to
  -s, --sn                Write serial number
  --help                  Show this message and exit.

sscma.cli flasher -p /dev/ttyUSB0 -f firmware.bin 

sscma.cli flasher -p /dev/ttyUSB0 -s