token package - go/token - Go Packages
Package token defines constants representing the lexical tokens of the Go programming language and basic operations on tokens (printing, predicates).
package main
import (
"fmt"
"go/ast"
"go/parser"
"go/token"
)
func main() {
fset := token.NewFileSet()
const src = `package main
import "fmt"
import "go/token"
//line :1:5
type p = token.Pos
const bad = token.NoPos
//line fake.go:42:11
func ok(pos p) bool {
return pos != bad
}
/*line :7:9*/func main() {
fmt.Println(ok(bad) == bad.IsValid())
}
`
f, err := parser.ParseFile(fset, "main.go", src, 0)
if err != nil {
fmt.Println(err)
return
}
// Print the location and kind of each declaration in f.
for _, decl := range f.Decls {
// Get the filename, line, and column back via the file set.
// We get both the relative and absolute position.
// The relative position is relative to the last line directive.
// The absolute position is the exact position in the source.
pos := decl.Pos()
relPosition := fset.Position(pos)
absPosition := fset.PositionFor(pos, false)
// Either a FuncDecl or GenDecl, since we exit on error.
kind := "func"
if gen, ok := decl.(*ast.GenDecl); ok {
kind = gen.Tok.String()
}
// If the relative and absolute positions differ, show both.
fmtPosition := relPosition.String()
if relPosition != absPosition {
fmtPosition += "[" + absPosition.String() + "]"
}
fmt.Printf("%s: %s\n", fmtPosition, kind)
}
}
Output: main.go:3:1: import main.go:5:1: import main.go:1:5[main.go:8:1]: type main.go:3:1[main.go:10:1]: const fake.go:42:11[main.go:13:1]: func fake.go:7:9[main.go:17:14]: func
- Constants
- func IsExported(name string) bool
- func IsIdentifier(name string) bool
- func IsKeyword(name string) bool
- type File
- func (f *File) AddLine(offset int)
- func (f *File) AddLineColumnInfo(offset int, filename string, line, column int)
- func (f *File) AddLineInfo(offset int, filename string, line int)
- func (f *File) Base() int
- func (f *File) End() Pos
- func (f *File) Line(p Pos) int
- func (f *File) LineCount() int
- func (f *File) LineStart(line int) Pos
- func (f *File) Lines() []int
- func (f *File) MergeLine(line int)
- func (f *File) Name() string
- func (f *File) Offset(p Pos) int
- func (f *File) Pos(offset int) Pos
- func (f *File) Position(p Pos) (pos Position)
- func (f *File) PositionFor(p Pos, adjusted bool) (pos Position)
- func (f *File) SetLines(lines []int) bool
- func (f *File) SetLinesForContent(content []byte)
- func (f *File) Size() int
- type FileSet
- func (s *FileSet) AddExistingFiles(files ...*File)
- func (s *FileSet) AddFile(filename string, base, size int) *File
- func (s *FileSet) Base() int
- func (s *FileSet) File(p Pos) (f *File)
- func (s *FileSet) Iterate(yield func(*File) bool)
- func (s *FileSet) Position(p Pos) (pos Position)
- func (s *FileSet) PositionFor(p Pos, adjusted bool) (pos Position)
- func (s *FileSet) Read(decode func(any) error) error
- func (s *FileSet) RemoveFile(file *File)
- func (s *FileSet) Write(encode func(any) error) error
- type Pos
- type Position
- type Token
const ( LowestPrec = 0 UnaryPrec = 6 HighestPrec = 7 )
A set of constants for precedence-based expression parsing. Non-operators have lowest precedence, followed by operators starting with precedence 1 up to unary operators. The highest precedence serves as "catch-all" precedence for selector, indexing, and other operator and delimiter tokens.
This section is empty.
IsExported reports whether name starts with an upper-case letter.
IsIdentifier reports whether name is a Go identifier, that is, a non-empty string made up of letters, digits, and underscores, where the first character is not a digit. Keywords are not identifiers.
IsKeyword reports whether name is a Go keyword, such as "func" or "return".
A File is a handle for a file belonging to a FileSet. A File has a name, size, and line offset table.
Use FileSet.AddFile to create a File. A File may belong to more than one FileSet; see FileSet.AddExistingFiles.
AddLine adds the line offset for a new line. The line offset must be larger than the offset for the previous line and smaller than the file size; otherwise the line offset is ignored.
func (*File) AddLineColumnInfo ¶ added in go1.11
AddLineColumnInfo adds alternative file, line, and column number information for a given file offset. The offset must be larger than the offset for the previously added alternative line info and smaller than the file size; otherwise the information is ignored.
AddLineColumnInfo is typically used to register alternative position information for line directives such as //line filename:line:column.
AddLineInfo is like File.AddLineColumnInfo with a column = 1 argument. It is here for backward-compatibility for code prior to Go 1.11.
End returns the end position of file f as registered with AddFile.
Line returns the line number for the given file position p; p must be a Pos value in that file or NoPos.
LineStart returns the Pos value of the start of the specified line. It ignores any alternative positions set using File.AddLineColumnInfo. LineStart panics if the 1-based line number is invalid.
Lines returns the effective line offset table of the form described by File.SetLines. Callers must not mutate the result.
MergeLine merges a line with the following line. It is akin to replacing the newline character at the end of the line with a space (to not change the remaining offsets). To obtain the line number, consult e.g. [Position.Line]. MergeLine will panic if given an invalid line number.
Name returns the file name of file f as registered with AddFile.
Offset returns the offset for the given file position p.
If p is before the file's start position (or if p is NoPos), the result is 0; if p is past the file's end position, the result is the file size (see also go.dev/issue/57490).
The following invariant, though not true for offset values in general, holds for the result offset: f.Offset(f.Pos(offset)) == offset
Pos returns the Pos value for the given file offset.
If offset is negative, the result is the file's start position; if the offset is too large, the result is the file's end position (see also go.dev/issue/57490).
The following invariant, though not true for Pos values in general, holds for the result p: f.Pos(f.Offset(p)) == p.
Position returns the Position value for the given file position p. If p is out of bounds, it is adjusted to match the File.Offset behavior. Calling f.Position(p) is equivalent to calling f.PositionFor(p, true).
PositionFor returns the Position value for the given file position p. If p is out of bounds, it is adjusted to match the File.Offset behavior. If adjusted is set, the position may be adjusted by position-altering //line comments; otherwise those comments are ignored. p must be a Pos value in f or NoPos.
SetLines sets the line offsets for a file and reports whether it succeeded. The line offsets are the offsets of the first character of each line; for instance for the content "ab\nc\n" the line offsets are {0, 3}. An empty file has an empty line offset table. Each line offset must be larger than the offset for the previous line and smaller than the file size; otherwise SetLines fails and returns false. Callers must not mutate the provided slice after SetLines returns.
func (*File) SetLinesForContent ¶
SetLinesForContent sets the line offsets for the given file content. It ignores position-altering //line comments.
A FileSet represents a set of source files. Methods of file sets are synchronized; multiple goroutines may invoke them concurrently.
The byte offsets for each file in a file set are mapped into distinct (integer) intervals, one interval [base, base+size] per file. FileSet.Base represents the first byte in the file, and size is the corresponding file size. A Pos value is a value in such an interval. By determining the interval a Pos value belongs to, the file, its file base, and thus the byte offset (position) the Pos value is representing can be computed.
When adding a new file, a file base must be provided. That can be any integer value that is past the end of any interval of any file already in the file set. For convenience, FileSet.Base provides such a value, which is simply the end of the Pos interval of the most recently added file, plus one. Unless there is a need to extend an interval later, using the FileSet.Base should be used as argument for FileSet.AddFile.
A File may be removed from a FileSet when it is no longer needed. This may reduce memory usage in a long-running application.
func NewFileSet() *FileSet
NewFileSet creates a new file set.
AddExistingFiles adds the specified files to the FileSet if they are not already present. The caller must ensure that no pair of Files that would appear in the resulting FileSet overlap.
AddFile adds a new file with a given filename, base offset, and file size to the file set s and returns the file. Multiple files may have the same name. The base offset must not be smaller than the FileSet.Base, and size must not be negative. As a special case, if a negative base is provided, the current value of the FileSet.Base is used instead.
Adding the file will set the file set's FileSet.Base value to base + size + 1 as the minimum base value for the next file. The following relationship exists between a Pos value p for a given file offset offs:
int(p) = base + offs
with offs in the range [0, size] and thus p in the range [base, base+size]. For convenience, File.Pos may be used to create file-specific position values from a file offset.
Base returns the minimum base offset that must be provided to FileSet.AddFile when adding the next file.
File returns the file that contains the position p. If no such file is found (for instance for p == NoPos), the result is nil.
Iterate calls yield for the files in the file set in ascending Base order until yield returns false.
Position converts a Pos p in the fileset into a Position value. Calling s.Position(p) is equivalent to calling s.PositionFor(p, true).
PositionFor converts a Pos p in the fileset into a Position value. If adjusted is set, the position may be adjusted by position-altering //line comments; otherwise those comments are ignored. p must be a Pos value in s or NoPos.
Read calls decode to deserialize a file set into s; s must not be nil.
RemoveFile removes a file from the FileSet so that subsequent queries for its Pos interval yield a negative result. This reduces the memory usage of a long-lived FileSet that encounters an unbounded stream of files.
Removing a file that does not belong to the set has no effect.
Write calls encode to serialize the file set s.
Pos is a compact encoding of a source position within a file set. It can be converted into a Position for a more convenient, but much larger, representation.
The Pos value for a given file is a number in the range [base, base+size], where base and size are specified when a file is added to the file set. The difference between a Pos value and the corresponding file base corresponds to the byte offset of that position (represented by the Pos value) from the beginning of the file. Thus, the file base offset is the Pos value representing the first byte in the file.
To create the Pos value for a specific source offset (measured in bytes), first add the respective file to the current file set using FileSet.AddFile and then call File.Pos(offset) for that file. Given a Pos value p for a specific file set fset, the corresponding Position value is obtained by calling fset.Position(p).
Pos values can be compared directly with the usual comparison operators: If two Pos values p and q are in the same file, comparing p and q is equivalent to comparing the respective source file offsets. If p and q are in different files, p < q is true if the file implied by p was added to the respective file set before the file implied by q.
Position describes an arbitrary source position including the file, line, and column location. A Position is valid if the line number is > 0.
String returns a string in one of several forms:
file:line:column valid position with file name file:line valid position with file name but no column (column == 0) line:column valid position without file name line valid position without file name and no column (column == 0) file invalid position with file name - invalid position without file name
Token is the set of lexical tokens of the Go programming language.
const ( ILLEGAL Token = iota EOF IDENT INT FLOAT IMAG CHAR STRING ADD SUB MUL QUO REM AND OR XOR SHL SHR AND_NOT ADD_ASSIGN SUB_ASSIGN MUL_ASSIGN QUO_ASSIGN REM_ASSIGN AND_ASSIGN OR_ASSIGN XOR_ASSIGN SHL_ASSIGN SHR_ASSIGN AND_NOT_ASSIGN LAND LOR ARROW INC DEC EQL LSS GTR ASSIGN NOT NEQ LEQ GEQ DEFINE ELLIPSIS LPAREN LBRACK LBRACE COMMA PERIOD RPAREN RBRACK RBRACE SEMICOLON COLON BREAK CASE CHAN CONST CONTINUE DEFAULT DEFER ELSE FALLTHROUGH FOR FUNC GO GOTO IF IMPORT INTERFACE MAP PACKAGE RANGE RETURN SELECT STRUCT SWITCH TYPE VAR TILDE )
The list of tokens.
Lookup maps an identifier to its keyword token or IDENT (if not a keyword).
IsKeyword returns true for tokens corresponding to keywords; it returns false otherwise.
IsLiteral returns true for tokens corresponding to identifiers and basic type literals; it returns false otherwise.
IsOperator returns true for tokens corresponding to operators and delimiters; it returns false otherwise.
Precedence returns the operator precedence of the binary operator op. If op is not a binary operator, the result is LowestPrecedence.
String returns the string corresponding to the token tok. For operators, delimiters, and keywords the string is the actual token character sequence (e.g., for the token ADD, the string is "+"). For all other tokens the string corresponds to the token constant name (e.g. for the token IDENT, the string is "IDENT").